Yokogawa PC-Based MX100 - Manual (Page 32)

3-13
IM MW180-01E
Viewer
1
2
3
4
5
App
Index
The alarm/mark list display’s cursors are linked with those of the waveform display and
numeric display layout screens. Alarms or marks selected with the cursor in the alarm/
mark list display can be copied to the clipboard using the Edit > Copy command.
The alarm/mark list can be converted to ASCII, Excel, or Lotus format (see section 3.7).
Alarm display limitation: One file can display a maximum of 10000 alarms.
Left-to-Right Alarm Search (Waveform Display Screen Only)
Searches alarms on the active channel.
Move cursor B to the next alarm change point on the left
Move cursor B to the next alarm change point on the right
Move cursor A to the next alarm change point on the right
Move cursor A to the next alarm change point on the left
Cursor A Select an active channel Cursor B
Alarm display
Left-to-Right Mark Search (Waveform Display Screen Only)
In the waveform display screen, move cursor A and B to the right or left side of the mark.
From the Edit menu, choose Mark Search. Or click the corresponding toolbar button.
Move cursor B to the left mark
Move cursor B to the right mark
Move cursor A to the right mark
Move cursor A to the left mark
Mark
The marks added in the browser
monitor screen are orange,
MW100 main unit trigger marks
are yellow, and marks added in
the Viewer are green.
3.2 Settings Related to Displaying Measured, Computed, and Thinned Data