Yokogawa PC-Based MX100 - Manual (Page 15)

IM MW180-01E
2-2
Address Setting Screen
If the check box is selected, the items that can and cannot be set change.
Dimmed setting items cannot be changed.
Resolves the IP address from the DHCP server.
Restores the settings to their defaults.
At the same time that the defaults are restored,
the software searches again for MW100s.
Restored to the condition before editing.
Click the Network Settings button to enable
changes to settings.
Updates edited contents.
At the same time that updating occurs,
the software searches again for MW100s.
2.1 Names of Parts in the Address Setting Software Screen and Their Uses