Chapter 3 viewer, 1 loading measured, computed, and thinned data, Loading measured, computed, and thinned data -1 – Yokogawa PC-Based MX100 User Manual
Page 20
3-1
IM MW180-01E
Viewer
1
2
3
4
5
App
Index
Chapter 3
Viewer
3.1 Loading Measured, Computed, and Thinned
Data
Procedure
1.
Start the Viewer.
2.
From the
File menu, choose Open.
You can also click the
button on the toolbar.
The Open dialog box opens.
3.
Select the file you wish to load and click
Open.
The waveform display window opens.
File information
This information is also printed when the display data is printed
When Loading Divided Data Files on the MW100
If you open a data file that was recorded using the Integration Monitor, a dialog
box opens asking you whether to synchronize the data file with a message
“Combining with related files?” before the waveform display screen appears. To
join the data files, click
Yes. To display only the specified file, click No.
Opens the waveform display window
Files are divided into the graphs and math channel graphs at the recording interval specified
on the browser even when in the same group.