Yokogawa PC-Based MX100 - Manual (Page 29)

3-10
IM MW180-01E
Channel Color
Clicking the channel color displayed in the Color column on the Display setup screen
opens the Color dialog box. You can select the color of each channel using the Color
dialog box.
Clipping of Waveforms
By default (clip OFF), the waveform is not displayed when the measured/computed value
exceeds the minimum/maximum value of the scale (see the lower left figure). When clip
is turned ON, values that are smaller than the minimum value of the scale are displayed
as the minimum value and the values that are larger than the maximum value of the
scale are displayed as the maximum value.
Clip OFF Clip ON
Expanding or Reducing the Time Axis on the Waveform Display
On the waveform display window, you can click the expand/reduce icon to expand or
reduce the time axis in the range of 20 to 1/1000 times for each waveform display area.
Magnification
Time axis expand/reduce icon
3.2 Settings Related to Displaying Measured, Computed, and Thinned Data