Yokogawa PC-Based MX100 - Manual (Page 24)

3-5
IM MW180-01E
Viewer
1
2
3
4
5
App
Index
Changing the Display Using the Menu
Choose appropriate commands from the Edit, View, and Window menus to change the
display.
Show the computation result display window
Show the window for displaying cursor values
Show the computation result display window
Add/delete a mark
Clear the Cursor
Switch between channel number, tag name,
and tag comment *1
Switch between absolute and relative time *2
Turn ON/OFF the toolbar
Turn ON/OFF the status bar
Arrange the display window
(select cascade or tile)
Arrange window icons
Show the waveform display window
Show the numeric display window
Switch the display window
*1 MW100 data do not have tag comments associated with them.
If you select Tag comment, the Tag name is displayed.
*2 When displaying numerical values, the Absolute Time/Relative
Time display format items are also displayed.
Select how to arrange the display area from auto, horizontal, and vertical
Change the data file display
Alarm/Mark detailed list display
Changing the Display Using the Display Setup Window
See the explanation in the figure below. Change the display settings and click OK.
Set the display for each display group.
Select the Y-axis
display format
Switch to another display group
Select channels (displays the channel selection dialog box)
Group name
Display ON/OFF
Select the Y-axis type (linear/logarithmic)
Turn Y-axis ON/OFF when displaying multi-axes zone
Maximum and minimum
values of the scale
Turn ON/OFF the trip point display
Trip point value
Channel display color
Display zone position
Click to display the flag to
select it for copying/pasting,
or click to hide the flag to
deselect it.
Note
The display settings of the browser are not applied to the Viewer.
3.2 Settings Related to Displaying Measured, Computed, and Thinned Data