Yokogawa PC-Based MX100 - Manual (Page 34)

3-15
IM MW180-01E
Viewer
1
2
3
4
5
App
Index
Initializing, Copying, and Pasting of Settings on the General Display
Settings Window
On the General Display Settings window, you can reset the settings to default or copy
and pate the settings of one or multiple waveforms to the settings of other waveforms.
You can copy and paste according to the procedure below.
Drag the copy source waveform numbers (No. column), click the Copy button, drag the
copy destination waveform numbers, and click the Paste button.
Click this button to turn ON/OFF the channels collectively
To copy/paste the item,
click to show the flag.
To not copy/paste the item,
click to hide the flag
Click this button
to reset to
default settings
Click this button to automatically assign the channels
in order
Click this button to enter the same settings
as the first channel in the selected range
Click to select all the channels
Drag to select a range
To paste the copied settings
To copy
the settings
To set the scale to match
the maximum and minimum
values of the data
Applying Data File Display Conditions
Group display conditions set using Viewer (including group data display conditions
reflecting the use of templates or the display conditions setting file) are cleared, and the
channel display returns to the data file display settings. If there are no display settings in
the data file, the default settings are restored.
The settings configured using the tool buttons in the upper part of the waveform display
screen for each group (alarm display ON/OFF, time axis zoom in/out, display zone
switching, grid display switching, and grid display ON/OFF), and the grid color and
waveform background color settings are restored to their default settings.
Zoom in or out of the time axis
Switch the display zone
Alarm display ON/OFF
Clip display ON/OFF
Switch the grid display
Move the cursor to the point where the alarm changed
3.2 Settings Related to Displaying Measured, Computed, and Thinned Data