Yokogawa PC-Based MX100 - Manual (Page 45)

3-26
IM MW180-01E
3.10 Printing the Data
You can print files loaded onto MW100 Viewer. The contents that can be printed differ
depending on the file type.
• Measured, computed, and thinned data files
The contents described in this section can be printed.
• Manual sample data and report data files
You can print, confirm the contents to be printed, and enter printer settings.
Procedure
Setting the Contents to Be Printed
1. From the File menu, choose Print Settings.
2. In the Printout Setting dialog box, set Range, Color, and Print Groups, and
then click OK. Enter a comment in the Comment box as necessary.
When printing numeric values, only a print Range need be selected.
Enter the comment to be printed
Switch to settings for numeric values
Select the groups when Selected
Groups is selected
Click to open the group selection
dialog box
Select monochrome or color print
Select the group to be printed
Settings for numeric values
Select to print all or print only the range specified by cursors