Yokogawa PC-Based MX100 - Manual (Page 25)

3-6
IM MW180-01E
Explanation
Display Groups and Group Names
The values of each channel that are loaded are divided into groups that were used during
recording and displayed using waveforms or numeric values. The measured/computed
values can be divided into up to fifty groups. Up to thirty-two channels can be registered
to a single group. If you click the channel selection button on the General Display
Settings window, the Channel No. dialog box opens (see the figure below). The labels
used to identify the waveforms can be set to tag names or tag comments in addition to
channel number on the View menu. The selected label type (channel number, tag name,
or tag comment) is used in the Channel No. dialog box. Select , if you are not
assigning a channel.
To turn ON/OFF the waveform display on the waveform display window, click the button
below the scale bar as shown in the figure below.
Hide the waveform
The name assigned to each group can be changed using up to thirty characters.
The names of the display groups that have channels registered are displayed on the
waveform display window or numeric display window.
Y-Axis Type
You can select linear or logarithmic Y-axis for displaying the waveforms.
Linear Logarithmic
3.2 Settings Related to Displaying Measured, Computed, and Thinned Data