Yokogawa Touch Screen GP20 - Manual (Page 82)

2-68
IM 04L51B01-17EN
2.10.12 Address Setting Log (FLog)
The output in response to the command “FLog,DHCP” is shown below.
Syntax
EA
yyyy/mo/dd_hh:mm:ss_kkk…k_mmm…m
…
EN
yyyy/mo/dd_hh:mm:ss Time of occurrence
yyyy Year (1900 to 2099)
mo Month (01 to 12)
dd Day (01 to 31)
hh Hour (00 to 23)
mm Minute (00 to 59)
ss Second (00 to 59)
kkk…k Type (fixed to 15 characters. Unused character positions are
filled with spaces. See table below.)
mmm…m Message (fixed to 20 characters. Unused character positions are
filled with spaces. See table below.)
Type Message Error Message
LINK ON Ethernet connection detected
OFF Ethernet disconnection detected
SET Address (e.g.,
10.0.122.3)
IP address set
DHCP OFF DHCP disabled
ON DHCP enabled
RENEWING Acquired IP address renewing
RELEASING Acquired IP address releasing
REJECTING Acquired IP address rejecting*
RENEWED IP address renewed
RELEASED IP address released
EXTENDED IP address extension application complete
ESEND DHCP message transmission failed
ESERVER DHCP server search failed
ESERVFAIL DHCP server response failed (reception timeout)
ERENEWED IP address renewal failed
ERELEASED IP address release failed
EEXTENDED IP address extension application failed
EEXPIRED IP address lease expiration
DNS UPDATED DNS host name registration complete
REMOVED DNS host name removal complete
EFORMERR DNS message syntax error
ESERVFAIL DNS server processing error
ENXDOMAIN DNS server query rejected
(domain does not exist)
EREFUSED DNS server query rejected
(process not allowed)
EYXDOMAIN DNS server query rejected
(record exists)
EYXRESET DNS server query rejected
(record exists)
ENXRESET DNS server query rejected
(record does not exist)
ENOTAUTH DNS server query rejected
(not authenticated)
ENOTZONE DNS server query rejected
(query error)
ENOTIMP DNS server query rejected
(The command is not implemented.)
ENONAME Tried to register an blank host name to the DNS server.
* If the GX/GP cannot accept the IP address obtained from the DHCP server, the GX/GP will
reject the address and immediately return a response to the DHCP server.
2.10 ASCII Output Format