Yokogawa Touch Screen GP20 - Manual (Page 66)

2-52
IM 04L51B01-17EN
2.8 Instrument Information
Output Commands
_MFG
Outputs the Instrument Manufacturer
Outputs the instrument manufacturer.
Syntax _MFG
Description
• For the ASCII output format, see
page 2-78 .
_INF
Outputs the Instrument’s Product Name
Outputs the instrument’s product name.
Syntax _INF
Description
• For the ASCII output format, see
page 2-78 .
_COD
Outputs the Instrument’s Basic
Specifications
Outputs the instrument’s basic specifications.
Syntax _COD
Description
• For the ASCII output format, see
page 2-78 .
_VER
Outputs the Instrument’s Firmware
Version Information
Outputs the instrument’s firmware version information.
Syntax _VER
Description
• For the ASCII output format, see
page 2-79 .
_OPT
Outputs the Instrument’s Option
Installation Information
Outputs the instrument’s option installation information.
Syntax _OPT
Description
• For the ASCII output format, see
page 2-79 .
_TYP
Outputs the Instrument’s Temperature
Unit and Daylight Saving Time
Installation Information
Outputs whether the instrument’s Fahrenheit temperature
unit and daylight saving time setting is enabled or
disabled.
Syntax _TYP
Description
• For the ASCII output format, see
page 2-80 .
_ERR
Outputs the Instrument’s Error Number
Information
Outputs the error description that corresponds to the error
number.
Syntax _ERR,p1,p2,...
Write the details of the negative response
returned from the GX/GP in p1, p2, etc.
Example Output the error description when negative
response "E1,10:1:2,500:2:5" is
returned.
_ERR,10:1:2,500:2:5
Description
• For the ASCII output format, see
page 2-80 .
_UNS or _UNR
Outputs the Instrument’s Unit
Configuration Information
Outputs the instrument’s unit configuration information.
Syntax _UNS Outputs the status that is recognized
by the device.
_UNR Outputs the installation status.
Description
• For the ASCII output format, see
page 2-81 .
_MDS or _MDR)
Outputs the Instrument’s Module
Configuration Information
Outputs the instrument’s module configuration
information.
Syntax _MDS Outputs the status that is recognized
by the device.
_MDR Outputs the installation status.
Description
• For the ASCII output format, see
page 2-82 .