Yokogawa AXFA14G/C - Manual (Page 40)

IM 01E20C02-01E 6-11
6. PARAMETER DESCRIPTION
(12) Item N (Menu N): Loop Test Setting items
Menu N contains items that are relevant to the execution of loop testing.
T0613.EPS
Item
Name
Display unit
(BRAIN)
Data range
Display unit
/BRAIN
Default value
(*): Indicated item
Units R/W
Position
of decimal
point
Description
Test
(TEST)
Test Mode
(TEST MODE)
Test Output Value
(TEST OUT VAL)
Test DIO (I)
(TEST DIO (I))
0
Test DO
(TEST DO)
Test DIO (O)
(TEST DIO (O))
R Open
Short
% -10 to 110
Normal
Test
Open(Off)
Closed(On)
Pulse
W
Input Mode
Open(Off)
Closed(On) W
W
W Selects the test condition for DO
terminal.
Good
Error
N11
R N60
N32
N30
N31
—
(SELF CHECK)
Selects the test condition for
DIO terminal used for output.
Sets the test output value.
Displays the test condition for
DIO terminal used for input.
See “6.5 Alarm Functions”.
Normal Selects whether mode will be set
to “Normal” or “Test”.
Open(Off)
N10
Input Mode
0%
N00
(13) Item P (Menu P): Parameter Protection items
Menu P contains items that are relevant to write protection and passwords.
T0613-1.EPS
Item
Name
Display unit
(BRAIN)
Data range
Display unit
/BRAIN
Default value
(*): Indicated item
Units
R/W
Position
of decimal
point
Description
R
New Password
(NEW PASSWORD)
Software Seal
(SOFT SEAL)
Enable Wrt Passwd
(ENABLE WRITE)
Protect
(PROTECT)
Key Code
(KEY CODE)
Write Protect
(W PROTECT)
0 to 9999
No
Yes
ASCII 8 characters
ASCII 8 characters
W
W
R
W
R Good
Error —
(SELF CHECK)
Break
Keep
P60 See “6.5 Alarm Functions”.
Sets the password for write protection
funcion
Displays whether or not overwriting
of parameter data is prohibited.
Sets the correct password so that
write protection function will be
released.
Displays whether or not a Joker
password was used (Break).
P22
P23
No
Keep
0
P00
P10
P20
Parameter of the display restriction
P21