Yokogawa AXFA14G/C User Manual
Page 27
![background image](/manuals/360070/27/background.png)
IM 01E20C02-01E
5-7
5. BASIC OPERATING PROCEDURES
5.3.2
Setting Example for Numeric-Type Data: Flow rate span
This example describes the setting of the flow rate span for the numeric-type parameter
B23: Flow Span from 100 l/min to 120 l/min.
Setting Mode Condition
Touch the
switch to access B: Easy Setup.
NOTE
The
᭡ and ᭢ symbols to the left of the param-
eters indicate that additional setting items to
those being currently displayed may also be
selected. Use the
switch to cycle through
these items.
Sub-Item Parameter Search Mode has been accessed
in this screen.
Touch the
switch to move the cursor to
B23: Flow Span.
The cursor has been moved to B23: Flow Span in
this screen. (Sub-item selection screen (B))
Touch the
switch to access Parameter
Replacement Mode.
Once Parameter Replacement Mode has been
selected, the digit that can be replaced will be flashed
on and off. When in this condition, confirm the
relevant setting range as displayed at the bottom of
the screen and then set the parameter as required.
In this example, the parameter will be set to “120 l/min”.
NOTE
When setting a new value, use the
switch to move from digit to digit, and use the
switch to cycle through values for each
individual digit. In addition to digit, it is also
possible to select a decimal point, and this
allows the position of the decimal point to be
changed.
Modify the value to “120 l/min” as follows:
Touch the
switch to move the cursor to the
position for multiples of 10. Then, touch the
switch to change the value at this position from “0” to
“2”.
When the value of “120” has been setup, touch the
switch.
Start:
Major Item
Parameter
Search Mode
F0505-1.EPS
Setting mode
X4
Major item
parameter
Major item
Sub-item
parameter
Major item
Sub-item
selection (B)
X4
X2
Parameter
Replacement Mode
Sub-item
Parameter
Search Mode
Setting Mode
P:Protect
B:Easy Setup
C:Basic Setup
B:Easy Setup
50:Auto Zero Exe
10:Language
20:Flow Damping
B:Easy Setup
22:Base Time Unit
23:Flow Span
24:Flow Decimal Pnt
Selection of the appropriate parameter
B23:Flow Span
100 l/min
000100. l/min
Rng:0.00001 32000
B23:Flow Span
100 l/min
0000100. l/min
Rng:0.00001
32000