IEI Integration WAFER-LX v1.22 - Manual (Page 81)

WAFER-LX Motherboard
Page 63
5.1 Anti-static Precautions
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the WAFER-LX. (Dry climates are especially susceptible to ESD.) It is therefore
critical that whenever the WAFER-LX (or any other electrical component) is handled, the
following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wrist band: - Wearing a simple anti-static wrist band can
help to prevent ESD from damaging the board.
ƒ Self-grounding:- Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
5.2 Installation Considerations
NOTE:
The following installation notices and installation considerations should
be read and understood before the motherboard is installed. All
installation notices pertaining to the installation of the motherboard
should be strictly adhered to. Failing to adhere to these precautions
may lead to severe damage of the motherboard and injury to the
person installing the motherboard.
5.2.1 Installation Notices
Before and during the installation of the WAFER-LX, please do the following:
ƒ Read the user manual:
o The user manual provides a complete description of the WAFER-LX,
installation instructions and configuration options.
ƒ Wear an electrostatic discharge cuff (ESD):
o Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.
ƒ Place the motherboard on an antistatic pad: