IEI Integration WAFER-LX v1.22 - Manual (Page 105)

WAFER-LX Motherboard
Page 87
Î
Enabled The system can be booted from a remote system
through the LAN.
Î SATA Boot ROM Control [Disabled]
Use the SATA Boot ROM Control option to configure SATA IDE use in DOS mode.
Î
Disabled D EFAULT Disables SATA IDE use in DOS mode.
Î
Enabled Enables SATA IDE use in DOS mode.
Î Boot Device
Use the Boot Device options to select the order of the devices the system boots from.
There are three boot device configuration options:
ƒ First Boot Device [Default: HDD-0]
ƒ Second Boot Device [Default: CDROM]
ƒ Third Boot Device [Default: SCSI]
Using the default values, the system first looks for a HDD to boot from. If it cannot find an
HDD, it boots from a CD-ROM. If both The HDD and the CD-ROM are unavailable, the
system boots from a SCSI drive.
Boot Device configuration options are:
ƒ Floppy
ƒ LS120
ƒ HDD-0
ƒ SCSI
ƒ CDROM
ƒ HDD-1
ƒ HDD-2
ƒ HDD-3
ƒ ZIP100
ƒ USB-FDD
ƒ USB-ZIP
ƒ USB-CDROM