5 serial device connection, Figure 4-20: parallel device connector – IEI Integration IMBA-G410 v2.00 User Manual

Page 75

2012/1/202012/1/20

IMBA-G410 ATX Mo th e rb o a rd

P a g e 61

Figure 4-20: Parallel Device Connector

S te p 3:

Secure the connector. Secure the DB-25 connector to the external interface by

tightening the two retention screws on either side of the connector.

4.6.5 S e ria l De vic e Co n n e c tio n

The IMBA-G410 has one male DB-9 connectors on the external peripheral interface panel

for a serial device. Follow the steps below to connect a serial device to the IMBA-G410.

S te p 1:

Locate the DB-9 connector. The location of the DB-9 connector is shown in

Chapter 3.

S te p 2:

Insert the serial connector.

Insert the DB-9 connector of a serial device into

the DB-9 connector on the external peripheral interface. See Figure 4-21.