IEI Integration IMBA-G410 v2.00 - Manual (Page 107)

2012/1/202012/1/20
IMBA-G410 ATX Mo th e rb o a rd
P a g e 93

Disabled USB function disabled

Enabled D EFAULT USB function enabled
 Le ga c y USB Support [Ena ble d]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support.
Normally if this option is not enabled, any attached USB mouse or USB keyboard does not
become available until a USB compatible operating system is fully booted with all USB
drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard
can control the system even when there is no USB driver loaded onto the system.

Disabled Legacy USB support disabled

Enabled D EFAULT Legacy USB support enabled

Auto Legacy USB support disabled if no USB devices are
connected
 USB 2.0 Controlle r Mode [HiSpe ed]
The USB2.0 Controller Mode BIOS option sets the speed of the USB2.0 controller.

FullSpeed The controller is capable of operating at full speed
12 Mb/s

HiSpeed D EFAULT The controller is capable of operating at high speed
480 Mb/s
5.3.8 Tru s te d Co m p u tin g
Use the Trusted Computing menu (BIOS Menu 13) to configure settings related to the
Trusted Computing Group (TCG) Trusted Platform Module (TPM).