IEI Integration IMBA-G410 v2.00 - Manual (Page 103)

2012/1/202012/1/20
IMBA-G410 ATX Mo th e rb o a rd
P a g e 89
RTC Alarm Date (Days)
System Time
After setting the alarm, the computer turns itself on
from a suspend state when the alarm goes off.
5.3.6 Re m o te Ac c e s s Co n fig u ra tio n
Use the Remote Access Configuration menu (BIOS Menu 11) to configure remote
access parameters. The Remote Access Configuration is an AMIBIOS feature and
allows a remote host running a terminal program to display and configure the BIOS
settings.
BIOS SETUP UTILITY
Advanced
Configure Remote Access type and parameters

Remote Access [Enabled]
Serial port number
[COM1]
Base Address, IRQ [3F8H, 4]
Serial Port Mode [115200 8,n,1]
Redirection After BIOS POST [Always]
Terminal Type [ANSI]
Select Remote Access
type.
 Select Screen
↑ ↓ Select Item
+ -
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 11: Remote Access Configuration
 Re mote Ac ce s s [Dis a bled]
Use the Remote Access option to enable or disable access to the remote functionalities
of the system.

Disabled D EFAULT Remote access is disabled.
 Enabled Remote access configuration options shown below
appear:
Serial port number