IEI Integration KINO-PV-D4252_D5252 - Manual (Page 98)

KINO-PV-D5252/D4252 Mini ITX SBC
Page 84

IO=2F8h;
IRQ=3, 4
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3 and IRQ4
5.3.6.1.1 Serial Port 1 Configuration
 Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Device Mode
Use the Device Mode option to set the Serial Port 1 signaling mode.

RS232 D EFAULT Serial Port 1 signaling mode is RS-232

RS485 Serial Port 1 signaling mode is RS-422/RS-485
 Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2F8h;
IRQ=3
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3

IO=3F8h;
IRQ=3, 4
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ3, 4

IO=2F8h;
IRQ=3, 4
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3, 4