IEI Integration KINO-PV-D4252_D5252 - Manual (Page 75)

KINO-PV-D5252/D4252 Mini ITX SBC
Page 61
4.8 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors
4.8.1 AT/ATX Power Connection
Follow the instructions below to connect the KINO-PV-D5252/D4252 to an AT or ATX
power supply.
WARNING:
Disconnect the power supply power cord from its AC power source to
prevent a sudden power surge to the KINO-PV-D5252/D4252.
Step 1: Locate the power cable. The power cable is shown in the packing list in
Chapter 3.
Step 2: Connect the Power Cable to the Motherboard. Connect the 4-pin (2x2) Molex
type power cable connector to the AT/ATX power connector on the motherboard.
See Figure 4-12.