2 dvi-d/usb kit installation (dvi model only), Figure 4-11: dvi-d/usb kit installation – IEI Integration PCIE-H610 User Manual

Page 66

PCIE-H610 PICMG 1.3 CPU Card

Page 51

4.5.2 DVI-D/USB Kit Installation (DVI Model Only)

The DVI-D/USB kit, consisting of one DVI-D and four USB ports, connects to the DVI-D

and USB connectors on the PCIE-H610. To install the DVI-D/USB kit, please follow the

steps below.

Step 1:

Connect the cables to the DVI-D/USB kit. Connect the included cables to the

DVI-D/USB kit.

Step 2:

Connect the cables to the board. Connect the other ends of the included

cables to the board.

Figure 4-11: DVI-D/USB Kit Installation

Step 3:

Mount the DVI-D/USB kit onto the chassis. Once the DVI-D/USB kit is

connected to the board, secure the DVI-D/USB kit bracket to the system

chassis.