ZOLL Propaq MD Rev C - Manual (Page 250)

C HAPTER 22 C OMMUNICATIONS
22–10 www.zoll.com 9650-0806-01 Rev. C
Changing the PIN
It may be necessary to change the PIN on the Propaq MD unit; check your device’s
documentation. To change the PIN, select Change Pin in the Bluetooth menu, then use the
numerical keypad to enter the desired PIN.
When finished pairing all Bluetooth devices, press the back arrow ( ) to return the wireless
menu. Press the arrow again to exit to the main screen.
Setting up Communications in the Supervisor Menu
The Communications menu is located in the Supervisor Setup menu. The Supervisor function is
restricted and requires password access.
In the Communications menu, you can:
• Create wireless profiles.
• Configure wireless or Ethernet connections.
• Configure report settings and set up distribution lists for 12-lead and full disclosure reports.
Setting up Wireless Profiles or an Ethernet Connection
If installed, you can set up different types of wireless profiles:
• WiFi access points
• Bluetooth connections (DUN or PAN-NAP profiles only)
• USB cellular modems
Note: Communications setup is not available in AED mode.
To access the Communications menu:
1. Press the More quick access key ( ).
2. Press the Setup quick access key ( ). Use the navigation keys to scroll down to Supervisor.
Press .