Teledyne LeCroy PETracer Summit and Summit T2-16 PCIe User Manual - Manual (Page 163)

Summit User Manual Chapter 9: BitTracer Recording
Teledyne LeCroy Corporation
155
Chapter 9: BitTracer Recording
9.1 Overview
Note: BitTracer Recording is an optional feature.
The PETracer Summit or Summit T2-16 analyzer has an optional BitTracer data capture
mode, which captures bi-directional link traffic in raw format. The BitTracer recording
mode captures and displays traffic before lane-to-lane de-skew operations and before
descrambling of 10b bytes. The BitTracer mode includes support for multiple logical links
(bifurcations) on a single physical link.
The BitTracer recording mode has its own user interface, which provides
characterizations of link traffic that are not available in the standard protocol analyzer
mode.
You can export BitTracer recordings for viewing in CATC Trace format.
PETracer Summit and Summit T2-16 Only
Note: BitTracer Mode recording is only available in the Teledyne LeCroy PETracer
Summit or Summit T2-16 PCI Express Gen2 Protocol Analyzer and is an optional
feature. This feature can be included at initial purchase or added in the field with a
software upgrade license. To obtain a software license key to add this feature, contact
Teledyne LeCroy.
9.2 Enabling BitTracer Recording
To enable the BitTracer recording mode, open the Recording Options dialog box.
In the Target Analyzer section of the General tab, select PETracer Summit or
Summit T2-16.
In the Recording Type section, select Bit Tracer Recording.