Staub Electronics B-500-MTRX-230-8X8 BINARY - HDMI 8X8 MATRIX SWITCH WITH HDMI AND HDBASET OUTPUTS - Manual (Page 4)

B-500-MTRX-230-8x8 Installation Manual
Pg. 4
© 2013 Binary ™
2. Product Overview
Welcome to Binary™, one of the most highly regarded brands available today. This product is engineered to
provide years of exceptional reliability. We appreciate your business and we stand committed to providing our
customers with the highest degree of quality and service in the industry.
The B-500-MTRX-230-8x8 is a state-of-the-art HDMI matrix switcher with both HDMI and HDBaseT Outputs. It provides
true matrix routing for HDMI signals. With features such as HDMI 3D support, sophisticated EDID handling, and IR,
RS232 and Ethernet control, this product is ideal for residential and commercial media distribution systems. The
HDBaseT connection on each output extends HDMI signal and bi-directional IR to remote rooms up to 230 feet away
via Cat5e/Cat6/Cat6a.
Note: This manual covers all aspects of installation and setup of the B-500-MTRX-230-8X8 for most application. Some
features must be configured using the Configuration Utility software. Go to the product page for the B-500-MTRX-
230-8X8 at www.SnapAV.com and click on the Support Tab to download the Configuration Utility and manual.
4. Features
• (8) HDMI inputs by (8) mirrored HDMI and HDBaseT outputs
• Up to 16 displays can be attached in total (using both HDMI and HDBaseT outputs)
• Supports Video resolutions up to1080p/60 36bit color
• Supports all HDMI audio formats including Dolby True HD and DTS Master HD
• Supports all HDMI 3D formats
• Sophisticated EDID handling including Embedded, Learned, and Auto modes
• HDMI or DVI with adapter (not included)
• IR Control from integrated receiver or 3.5mm input
• Bi-directional IR pass-through when using B-500-RX-230-IR
• Home Automation Control via IR, RS-232 and Ethernet
• PC Setup and Configuration using dedicated software
• HDCP 2.0 compliant
• CEC Pass Through
5. Recommended for Installation
• Phillips Screwdriver (for rack ear attachment)
• Up to 8 sources
• Up to 8 displays (16 if using both HDBaseT and HDMI outputs, see Section 7.6, Page 9)
• Binary High Speed HDMI Cables to connect sources to B-500-MTRX-230-8x8 HDMI inputs
• Binary HDMI cables or B-500-RX-230-IR units and Cat 5e/6 cable installed between matrix switcher location and
displays (See section 7.6.3.1, page 10 for HDBaseT wiring recommendations)
• RJ45 connectors and termination tools (If using B-500-RX-230-IR)
• Control System to control operation of B-500-MTRX-230-8x8
• Windows PC with Configuration Utility installed and RS232 adapter
• Configuration Utility Manual
3. Package Contents
• (1) B-500-MTRX-230-8x8
• (2) Rack ears for mounting (screws included)
• (1) IR Remote Control
• (1) Power supply 24V 5A DC
• (1) Installation Manual
• (1) CD-ROM