beautypg.com

Staub Electronics B-500-MTRX-230-8X8 BINARY - HDMI 8X8 MATRIX SWITCH WITH HDMI AND HDBASET OUTPUTS User Manual

Page 23

background image

B-500-MTRX-230-8x8 Installation Manual

Pg. 23

www.snapav.com Support: 866.838.5052

11.1.4. Resetting to Factory Defaults
This procedure resets the B-500-HDMATRIX to factory defaults:
• EDIDs - 1080p Stereo (embedded EDID 2)
• I/O - All Outputs set to Input 1
• 1CAT EDIDs cleared, DHCP - Enabled.

Reset Factory Defaults

Display Readout

(Example)

1. Press DEFAULT

E-

2. Press DEFAULT

--

3. Press DEFAULT

--

4. Press DEFAULT

DD

5. Press ENTER

D-

Note: Resetting factory defaults can take up to 2 minutes to complete. Wait until the screen displays an output and input

selection of 1.1 before attempting further setup or use.