Staub Electronics SM-FLAT-S STRONG - SMALL LOW PROFILE FLAT MOUNT FOR 13-26 DISPLAYS - Manual

Lifetime Limited Warranty
Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components
found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to prod-
ucts which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned
to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
For Technical Support call 1.866.838.5052
Lifetime
100823
SM-FLAT-S
Strong™ Small Low Profile Flat Mount
for 13-26 in. Displays (Black)
Step 3: Attaching the Adapter Plate
to the Display
a. Attach the Adapter Plate to the display using
M4, M5, M6, or M8 screws. For displays with
a hole pattern in a pocket or inputs behind
Adapter Plate, spacers go between Adapter
Plate and display (Fig 3).
Step 4: Attaching the Adapter Plate with
Display to Wall Arm Assembly
a. Attach Adapter Plate and Display onto
Wall Arm Assembly, ensuring top and
bottom hooks slide into holes of Mounting
Head (Fig 4).
b. Using a long-nosed Philips Head Screwdriver,
tighten down Locking Screw located on
Adapter Plate into threaded hole in the
Mounting Head on Wall Arm Assembly.
Fig 3
Fig 4