Staub Electronics SM-CM-T-L STRONG - LARGE CEILING MOUNT FOR 36-60 FLAT PANEL TVS - Manual

O
C, E, I, or L
M or N
A, B, D, E, G, H, J, or K
Lifetime Limited Warranty
Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components
found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to prod-
ucts which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned
to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
For Technical Support call 1.866.838.5052
Lifetime
3. Insert the metal bushings into the top and bottom
of the lower pole (see illustration 3a) and attach
the back plate to the lower pole using the supplied
Hex Bolt, Washers and Nut (See illustration 3b)
with 17mm socket. NOTE: Backplate tilt adjusting
levers are oriented on the top.
5. Using help of another person, hook the
display with the mounting arms attached
onto the lower portion of the mount.
IMPORTANT: Using a Philips head
Screwdriver, tighten the security screws
on the bottom of the arms to make sure
the display is
not accidentally
knocked from
the mount.
6. To set the tilt, have one person hold the display
firmly while another loosens the tilt adjustment
levers (see illustration 6). Move the display to the
desired tilt angle and retighten the adjustment
ratchet levers. Cables may be routed through the
drop down pole of the mount.
Tilt Adjustment
Knobs
4. Attach the Mount Arms to your Display using
the bolts provided with your display or the
appropriate hardware from hardware kits 1-5.
Use a lock washer (C, F, I, or L) and M6 Washer (O)
if needed. Spacers (M,N) should only be used
for displays with curved backs or recessed
mounting holes.
Security Screws
090819
F
SM-CM-T-L
Universal Ceiling Mount
3a
3b
4
5
6