Staub Electronics B-220-HDSWTCH-3X1 BINARY - HDMI 3X1 SWITCHER - Manual

OWNER’S MANUAL
B-220-HDSWTCH-3x1
HDMI 3X1 SWITCHER >>
IMPORTANT SAFETY INSTRUCTIONS WELCOME TO BINARY™
CONTENTS
FEATURES
1. Read and follow all instructions and warnings in this manual. Keep for future
reference.
2. Do not use this apparatus near water.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install according to manufacturer’s
instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat.
6. Do not override the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades - one wider than the other. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
7. Protect the power cord from being walked on or pinched particularly at plug,
convenience receptacles, and the point where it exits from the apparatus.
8. Only use attachments/accessories specified by the manufacturer.
9. Unplug this apparatus during lightning storms or when unused for long periods
of time.
10. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as when the power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
11. Do not expose this equipment to dripping or splashing and ensure that no
objects filled with liquids, such as vases, are placed on the equipment.
12. To completely disconnect this equipment from the AC mains, disconnect the
power supply cord plug from the AC receptacle.
• Switches 3 HDMI sources to a single display
• 6.75 Gbps Bandwidth
• Full 1080p HD with Deep Color
• Supports 7.1 channel surround sound, DTS-HD Master
Audio and TrueHD high bit rate audio
• Input Switching via Front Panel or included IR Remote
• Input memory allows the switch to return to the last
selected input if powered off
This product is designed to provide years of exceptional reliability. Binary™ is one
of the most highly-regarded Media Distribution brands available today and we
stand committed to providing our customers with the highest degree of quality and
service in the industry.
(1) HDMI Switcher, 3x1
(1) 5VDC Power Adapter
(2) Mounting Ears
(4) Rubber Feet
(1) Owner’s Manual
Pg. 2 Pg. 3
CONNECTIONS INSTALLATION
1. Connect the sources to the HDMI inputs into the B-220-HDSWTCH.
2. Connect the HDMI output to the display (monitor or projector).
3. Connect 5V power supply.
4. Inputs can be switched by IR or Front Panel button.
NOTE: Blue LED indicates successful sync
1. IR Sensor
2. Power LED
3. Source Selector Button
4. Input Status LEDs
1. HDMI Inputs
2. HDMI Outputs
3. Power Supply (+5V DC)
5V DC 1A
OUTPUT
Flatpanel TV
B-220-HDSWTCH-3x1
AppleTV
Blu ray Player Cable/Sat
Receiver
AC Power
IR POWER INPUT 1 INPUT 2 INPUT 3 SELECTION
STATUS
1 2 3
4
5V DC 1A
OUTPUT
2 1 3
Pg. 4 Pg. 5
FRONT PANEL REAR PANEL