Staub Electronics SM-CEILING-T-M STRONG - MEDIUM CEILING MOUNT FOR 22-40 FLAT PANEL DISPLAYS - Manual

Lifetime Limited Warranty
Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components
found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to prod-
ucts which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned
to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
For Technical Support call 1.866.838.5052
Lifetime
100823
SM-CEILING-T-M
SM-CEILING-DT-M
Strong™ Medium Ceiling Mount and Dual Ceiling Mount
for 22-40 in. Flat Panel TVs (Black)
d. Install Ceiling Plate Covers over ends of
Ceiling Plate (optional).
Step 3: Attach the Mount Head
a. Screw the Mount Head on to the end of the
Extension Pole and tighten Set Screw (Fig 3).
Step 4: Attach the Adapter Plate
to the Display
a. Attach the Adapter Plate to the display
using M4, M5, M6, or M8 screws. For
displays with a hole pattern in a pocket
or inputs behind Adapter Plate, spacers
go between Adapter Plate and display
(Fig 4).
Step 5: Attaching the Adapter Plate with
Display to Ceiling Mount Assembly
a. Attach mount head to end of extension pole
and tighten set screws.
b. Attach Adapter Plate and Display onto Wall
Arm Assembly, ensuring all 3 hooks slide into
holes of Mount Head (Fig 5).
c. Using a Philips Head Screwdriver, tighten
down Locking Screw located on Adapter
Plate into threaded hole in the Mount Head.
ADJUSTMENTS
Adjust Tilt
Tilt Adjustment
a. Loosen screws on side of mount head. (Only enough to allow
controlled adjustment)
b. Adjust Tilt forward or backward
c. Tighten screws on side of mount head to hold tilt.
Fig 4
Fig 5
Fig 3
SM-CEILING-DT-M
SM-CEILING-T-M