KB Electronics KBDF-48 - Manual (Page 28)

28
8.4.1.2 2-WIRE START/STOP
Close the Start/Stop Contact to Start the drive. Open the Start/Stop Contact to the Stop the
drive. See Figure 15, for connections and drive programming.
FIGURE 15
2-WIRE START/STOP
CONNECTIONS AND DRIVE PROGRAMMING
*Factory setting.
8.4.1.3 3-WIRE START/STOP
Momentarily close the Start/Stop Contact to Start the drive. Momentarily open the Start/Stop
Contact to Stop the drive. See Figure 16, for connections and drive programming.
FIGURE 16
3-WIRE START/STOP
CONNECTIONS AND DRIVE PROGRAMMING
*Factory setting.
Program Function Setting
1.00: Run/Stop-Forward/Reverse Control 0001: External Contacts*
7.04: Multi-Function Input Terminal 5 (TB1 Term. 9) 0010: N.O. Start (2-Wire or 3-Wire Start/Stop)*
Program Function Setting
1.00: Run/Stop-Forward/Reverse Control 0001: External Contacts*
7.03: Multi-Function Input Terminal 4 (TB1 Term. 8) 0011: N.C. Stop (3-Wire Start/Stop)
7.04: Multi-Function Input Terminal 5 (TB1 Term. 9) 0010: N.O. Start (2-Wire or 3-Wire Start/Stop)*