KB Electronics KBDF-48 - Manual (Page 11)

11
5.1 STANDARD FEATURES
● Simplified Programming: Programmable parameters are organized into easy-to-understand
intuitive groups. Factory programming available.
● Local/Remote Operation: When used with process control, the Local/Remote Key can be
used to switch from process control to manual control if a process fault occurs.
● Built-In EMC Filter
1 : Complies with CE Council Directive 89/336/EEC Class A Industrial
Standard. Reduces the footprint and cost compared to an external filter. See Note 1.
● Memory Module
2 : The optional Memory Module can store up to 4 programs for cloning and
archiving. The drive can also store up to 4 programs.
● Contactor Style Feed-Throughs: Provides top entry AC power connections and bottom entry
motor connections. Space saving design easily replaces contactors and provides simplified
panel wiring and installation.
● Current and Torque Limit: Current and torque limiting in motoring and braking quadrants.
Automatic extending of Accel and Decel eliminates tripping caused by rapid acceleration and
deceleration of high inertial loads. Spin Start operation catches a spinning load and allows a
smooth return to the set motor speed.
● 4-Digit Display, 8 status LEDs, and Easy-to-Use Multi-Function Keypad: Provides readout
of drive operating parameters and programming functions, indication of drive status and
operating modes.
● Inputs/Outputs: 7 Multi-Function Inputs with sink or source mode control logic, 2 Analog
Inputs, 2 Multi-Function Output Relays, 1 Analog Output, and External Power Supply Input. All
control inputs are isolated from the AC Line. 7 Preset Frequencies. Remote Start/Stop, and
Forward/Reverse Control. NPN or PNP Inputs can be used for sinking or sourcing. Some
features require the optional IODF Input/Output Multi-Function Expansion Module.
● Built-In Potentiometer: Adjusts set motor speed in lieu of the keypad.
● Custom Programming for OEM Applications: Provides out-of-the-box operation.
Notes: 1. Models KBDF-23F, 24F, 27F contain a built-in Class A RFI (EMI) AC Line Filter.
2. Optional Accessory.