IAI America IA-T-XD - Manual (Page 55)

9. Simple Operation Procedure
46
Select the F1 key (Mdfy) on the program edit and
new creation screen.
Change to the program edit mode screen. Press the
return key once and position the cursor at the step
No.
Insert a 1 line step between step No. 2 and 3. Input 3
by pressing “3” or display 3 by pressing the PAGE
UP key twice.
Select the F1 key (Ins).
I, Insert of I will be displayed after step No. 3.
Display “TAG” by using the 1 key or the SF (shift)
key.
47
Select the F4 key (TAG) and press the return key.
Input 1 into operation 1 and press the return key.
Transmit the data to the controller by pressing the
WRT key.
* If you change the screen with the PAGE UP ·
PAGE DOWN or ESC keys before transmitting
the data, the input data will be invalid.
Display the step No. 4 screen by pressing the ESC
key twice.
Delete the “MOVL 6.” Input 9 for the step No. by
pressing the 9 key directly to the same cursor
location or display the “MOVL 6” by pressing PAGE
UP key 5 times.
(The cursor is located at step No.9.)