IAI America IA-T-XD - Manual (Page 49)

9. Simple Operation Procedure
40
The cursor moves to operation 1.
Input 11 and press the return key.
:F@@
Move the cursor where you want to redo an input by
pressing the m key and return key. Write over or
delete with BS (backspace) key. Or redo from step
No. by using ESC key.
Transmit data to the controller by pressing the WRT
key.
Step No. moves to 2.
* If you change the screen with the PAGE UP ·
PAGE DOWN or ESC keys before transmitting
the data, the input data will be invalid.
Press the 10 key, 2 or SF(shift) key to search VEL.
Select the F3 key (VEL).
Press the return key.
Step No. 2
41
Here, input the velocity* as 100, and press the return
key.
* Check the maximum velocity listed in the catalogs.
When velocity is input into position data, priority is
given there.
Transmit the data to the controller by pressing the
WRT key.
The cursor moves to step No. 3.
* If you change the screen with the PAGE UP ·
PAGE DOWN or ESC keys before transmitting
the data, the input data will be invalid.
By using the 5 and SF(shift) keys, this will display
the MOVL.
Select the F3 key (MOVL).
Press the return key.
The cursor moves to operation 1.