IAI America IX-NNN8040 User Manual
Page 56

48
6. Precautions for Use
(20) If an absolute reset was performed on both the rotational axis and vertical axis or if the home position
was updated automatically based on arm 1 or 2 by mistake, closing the absolute reset window will
open the following screen. Click the “No” button.
x Click “Yes” only if you have released a mechanical connection such as replacing an arm or belt.
x Click “No” if you have replaced a cable.
x When all steps are finished, be sure to perform a “software reset.”
(21) Perform a software reset.
To perform a software reset, select “Software Reset (R)” from “Control (C)” in the menu bar. (Refer to
6.3.5.)
This manual is related to the following products: