IAI America RCP4W - Manual (Page 31)

2. Installation
25
2.3 How to Install
Shown below is how to install the actuators to the machinery equipment.
2.3.1 Attachment Orientation
Shown below are the basic concepts for the product attachment.
Pay special attention when deciding how to install the product (Except with custom-order models).
{ : Available ×: Not available
Attachment
Orientation
Horizontal
Installation
Vertical
Installation
Wall Mount
Installation (Note 1)
Ceiling Mount
Installation (Note 1)
Types of
Installation
Standard Type – Wall-hang Type Ceiling Type
Installation
Availability
{ × { {
Note 1 It is necessary to have the dedicated bracket (option). Request should be made at the order.
Attachment Orientation
Horizontal Vertical Wall Mount Ceiling Mount
Caution: The actuator can only be installed in the orientation with the opening on the bottom
side when it is in the wall mount or ceiling mount installation. If installation is conducted
in a way out of indicated, the Protection Class cannot be guaranteed.