Gilderfluke&Co BR-SDC Serial Device Controller - Manual (Page 49)

String
Entry
Multiplexer
Selected
Mux4
Mux5
Mux6
Mux7
Mux8
Tx = #4, Rx = #4
Tx = #5, Rx = #5
Tx = #6, Rx = #6
Tx = #7, Rx = #7
Tx = #8, Rx = #8
Note that when using the embedded ʻMuxʼ commands, it is not possible to transmit
through more than one multiplexer output at one time, unless you want to transmit to all
of them simultaneously (Mux0).
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Br-SDC Manual / December 30, 2013 9:24 AM / page 49 of 62