AMX Modero NXD-500i User Manual

Page 85

Programming

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Page Commands (Cont.)

@PPA

Close all popups
on a specified
page.

If the page name is empty, the current page is used. Same as the ’Clear Page’ command
in TPDesign4.
Syntax:

"'@PPA-'"

Variable:

page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

Example:

SEND_COMMAND Panel,"'@PPA-Page1'"

Close all popups on Page1.

@PPF

Deactivate a
specific popup
page on either a
specified page or
the current page.

If the page name is empty, the current page is used (see example 2). If the popup page is
part of a group, the whole group is deactivated. This command works in the same way as
the ’Hide Popup’ command in TPDesign4.
Syntax:

"'@PPF-;'"

Variable:

popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

Example:

SEND_COMMAND Panel,"'@PPF-Popup1;Main'"

Deactivates the popup page ’Popup1’ on the Main page.
Example 2:

SEND_COMMAND Panel,"'@PPF-Popup1'"

Deactivates the popup page ’Popup1’ on the current page.

@PPG

Toggle a specific
popup page on
either a specified
page or the
current page.

If the page name is empty, the current page is used (see example 2). Toggling refers to the
activating/deactivating (On/Off) of a popup page. This command works in the same way
as the ’Toggle Popup’ command in TPDesign4.
Syntax:

"'@PPG-;'"

Variable:

popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

Example:

SEND_COMMAND Panel,"'@PPG-Popup1;Main'"

Toggles the popup page ’Popup1’ on the ’Main’ page from one state to another (On/Off).
Example 2:

SEND_COMMAND Panel,"'@PPG-Popup1'"

Toggles the popup page ’Popup1’ on the current page from one state to another (On/Off).

@PPK

Kill a specific
popup page from
all pages.

Kill refers to the deactivating (Off) of a popup window from all pages. If the pop-up page is
part of a group, the whole group is deactivated. This command works in the same way as
the 'Clear Group' command in TPDesign 4.
Syntax:

"'@PPK-'"

Variable:

popup page name = 1 - 50 ASCII characters. Name of the popup page.

Example:

SEND_COMMAND Panel,"'@PPK-Popup1'"

Kills the popup page ’Popup1’ on all pages.