AMX Modero NXD-500i - Manual (Page 101)

Programming
95 NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom
"^" Button Commands (Cont.)
^BMF
(Cont.) For some of these commands and values, refer to theRGB Values for all 88 Basic
Colors table on page 83.
’%CF’ = Set Fill Color.
’%CB’ = Set Border Color.
’%CT’ = Set Text Color.
’%SW<1 or 0>’ = Show/hide a button.
’%SO’ = Set the button sound.
’%EN<1 or 0>’ = Enable/disable a button.
’%WW<1 or 0>’ = Word wrap On/Off.
’%GH’ = Set the bargraph upper limit.
’%GL’ = Set the bargraph lower limit.
’%GN’ = Set the bargraph slider name/Joystick cursor name.
’%GC’ = Set the bargraph slider color/Joystick cursor color.
’%GI’ = Set the bargraph invert/noninvert or joystick coordinate
(0,1,2,3). See the ^GIV command on page 102 for more information.
’%GU’ = Set the bargraph ramp up time in intervals of 1/10 second.
’%GD’ = Set the bargraph ramp down time in 1/10 second.
’%GG = Set the bargraph drag increment. Refer to the ^GDI
command on page 101 for more information.
’%VI’ = Set the Video either ON (value=1) or OFF (value=0).
’%OT’ = Set the Feedback (Output) Type to one of the following:
None, Channel,Invert, ON (Always ON), Momentary, or Blink.
’%SM’ = Submit a text for text area button.
’%SF<1 or 0>’ = Set the focus for text area button.
’%OP<0-255>’ = Set the button opacity to either Invisible (value=0) or Opaque
(value=255).
’%OP#<00-FF>’ = Set the button opacity to either Invisible (value=00) or Opaque
(value=FF).
’%UN’ = Set the Unicode text. See the^UNI section on page 107 for the
text format.
’%LN<0-240>’ = Set the lines of video being removed. See the^BLN section on page 92
for more information.
’%EF’ = Set the text effect.
’%EC’ = Set the text effect color.
’%ML’ = Set the maximum length of a text area.
’%MK’ = Set the input mask of a text area.
’%VL<0-1>’ = Log-On/Log-Off the computer control connection
’%VN’ = Set network connection name.
’%VP’ = Set the network connection password.
Example:
SEND_COMMAND Panel,"'^BMF-500,1,%B10%CFRed%CB Blue
%CTBlack%Ptest.png'"
Sets the button OFF state as well as the Border, Fill Color, Border Color, Text Color, and
Bitmap.