Information – AMX Modero NXD-500i User Manual

Page 56

Setup Pages and Descriptions

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Information

Pressing and holding the Information button provides a menu to select either the Panel Information
page or the Panel Information page. Select either option to access that page.

Panel Information Page

The Project Information page displays the TPDesign4 (TPD4) project file properties currently loaded on
the selected Modero panel (FIG. 37). Refer to the TPDesign4 Touch Panel Program instruction manual
for more specific information on uploading TPDesign4 files to a panel.

The elements of the Project Information page are described in the table below:

FIG. 37

Project Information page

Project Information Page Elements

Back:

Returns to the previously active touch panel page.

Connection Status icon:

This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection

with a currently secured target Master (requiring a username and password).

File Name:

Displays the name of the TPDesign4 project file downloaded to the panel.

Designer ID:

Displays the designer information.

File Revision:

Displays the revision number of the file.

Dealer ID:

Displays the dealer ID number (unique to every dealer and entered in TPD4).

Job Name:

Displays the job name.

Sales Order:

Displays the sales order information.

Purchase Order:

Displays the purchase order information.

AMX IR Ports:

Displays the AMX 38 kHz IR channel port used by the IR receiver on the panel.
• This information is pulled by the panel from AMX IR Receivers section of the

TPD4 Project Properties > IR Emitters & Receivers tab.

• For IR reception, this is the port that reports a push on for the corresponding

IR code.

• IR receivers and transmitters on G4 panels share the device address number

of the panel.

Build Number:

Displays the build number information of the TPD4 software used to create the
project file.

Creation Date:

Displays the project creation date.