Ronan XSD-1000 User Manual
Page 44
43
Speed Alarms
The top item in this menu is the speed units. Select either MPH or KPH for your use.
Notice that the Maximum Speed will be automatically changed based on your selection.
After your units selection, type in the correct speed in the second section.
The maximum speed for vehicles is typically 5 MPH (8 KPH). Unless otherwise
instructed by Ronan factory personnel, this value should remain at 5 MPH (8 KPH).
Speed detection is performed using photo-eyes. In a single photo-eye pair system, speed
checking cannot be performed.
See also other documents in the category Ronan Equipment:
- X16PDM (53 pages)
- X120 (35 pages)
- X11SN (23 pages)
- X11CB (2 pages)
- X11CA (20 pages)
- X11CA Software Manual (65 pages)
- X11CA Hardware Manual (53 pages)
- X500F (60 pages)
- X71 (8 pages)
- X57 (8 pages)
- X55-600 Series (24 pages)
- X54-3412 (2 pages)
- X54-3402 (2 pages)
- X54-3302 (2 pages)
- X54-3224 (2 pages)
- X54-3212 (2 pages)
- X54-3202 (2 pages)
- X76CTM (38 pages)
- 7100M (2 pages)
- X90 Series (20 pages)
- X96S WEIGH SCALE (68 pages)
- X96S MOLD LEVEL GAGE (61 pages)
- X96S LEVEL GAGE (56 pages)
- X96S MASS FLOW GAUGE (77 pages)
- X96S DENSITY GAGE (67 pages)
- Interface System (5 pages)
- Ion Chamber Detector (2 pages)
- Rigid Scintillation Detector (3 pages)
- Scintillation FlexDetector (3 pages)
- LS-S (2 pages)
- SA-4 (2 pages)
- GS-200 (2 pages)
- GS-400 (2 pages)
- SA-1 (2 pages)
- RLL-1_1A (2 pages)