Ronan XSD-1000 - Manual (Page 36)

35
Detector Locations
In this menu, you position the detectors as they are mounted around the Truck Path. This
will permit the system to approximate where on the truck a Radiation Alarm occurred.
Initially, the detectors are listed in the upper left corner of the screen. As you view the
back of a truck in the ‘Incoming’ direction through the Truck Path. Move the mouse over
one of the detector boxes, hold down the left mouse button, and ‘drag’ the detector to its
position around the truck. It is not important how close to the truck you get (stay within
the dotted boxes). If you have a two detector system, try to get the detector boxes as
close to the vertical center of the dotted box as possible. For top or bottom-mounted
detectors, try to get as close as you can horizontally to the center of the box. A four
detector system will mean that you should try to get each detector box about 1/3 of the
way away from the top or bottom of the dotted boxes.
The following is an illustration of a two detector system: