Ronan XSD-1000 - Manual (Page 35)

34
Detectors
You can select which detectors you have in your system with this screen. Each detector
number is associated with a Remote I/O Module Address. If you activate a detector that
has no Remote I/O Module currently active, the system will warn you. Unless you are
upgrading your system, you should not activate detectors with no Remote I/O Module
present.
The Dual Option means that you have two detectors at that position. This is normally a
special detector with two electronic heads that act as one (or two detectors end-to-end).
Do not enable this option if you do not have actual Dual Detectors with your system.