Ronan X96S WEIGH SCALE User Manual
Page 54
50
Detector Service
The critical components of the electronic circuit and the
PMT/Crystal Assembly are aligned before leaving the
factory. If any component of the Scintillation Detector is
adjusted or replaced, the performance of the entire system
will be adversely affected and will require realignment
before continued use is possible.
Therefore, the scintillation detector IS NOT field
serviceable. Should a problem arise with the detector, the
entire Detector Assembly should be returned to Ronan for
repair/replacement.
See also other documents in the category Ronan Equipment:
- X16PDM (53 pages)
- X120 (35 pages)
- X11SN (23 pages)
- X11CB (2 pages)
- X11CA (20 pages)
- X11CA Software Manual (65 pages)
- X11CA Hardware Manual (53 pages)
- X500F (60 pages)
- X71 (8 pages)
- X57 (8 pages)
- X55-600 Series (24 pages)
- X54-3412 (2 pages)
- X54-3402 (2 pages)
- X54-3302 (2 pages)
- X54-3224 (2 pages)
- X54-3212 (2 pages)
- X54-3202 (2 pages)
- X76CTM (38 pages)
- 7100M (2 pages)
- XSD-1000 (81 pages)
- X90 Series (20 pages)
- X96S MOLD LEVEL GAGE (61 pages)
- X96S LEVEL GAGE (56 pages)
- X96S MASS FLOW GAUGE (77 pages)
- X96S DENSITY GAGE (67 pages)
- Interface System (5 pages)
- Ion Chamber Detector (2 pages)
- Rigid Scintillation Detector (3 pages)
- Scintillation FlexDetector (3 pages)
- LS-S (2 pages)
- SA-4 (2 pages)
- GS-200 (2 pages)
- GS-400 (2 pages)
- SA-1 (2 pages)
- RLL-1_1A (2 pages)