Calibrate menu, Cal speed menu, Low reference (calibrate) menu – Ronan X96S WEIGH SCALE User Manual
Page 32: High calibrate (calibrate) menu, Low reference (cal speed) menu
28
Calibrate Menu
This menu is used to access the various weight calibration procedures. It contains the following items:
ITEM
FUNCTION
State
Shows the state of the weight configuration process
Low Reference
Selecting this item takes the user to the Low Reference menu
High Calibrate
Selecting this item takes the user to the High Calibrate menu
Manual Entry
Shows and allows the user to set the calculated Loading Factor value (Same value as
in Calibrate Menu, L.F.)
Clear Ref/Cal
This item invokes method that clears the weight reference and L.F. (Loading Factor)
Low Reference (Calibrate) Menu
This menu is used to perform the low reference procedure. It contains the following items:
ITEM
FUNCTION
Reference
This item invokes a method that performs the low reference procedure
Ref Weight
Shows, and allows the user to set, the reference weight value
Ref Cap
Shows the captured reference counts
High Calibrate (Calibrate) Menu
This menu is used to perform the high calibrate procedure. It contains the following items:
ITEM
FUNCTION
Calibrate
This item invokes a method that performs the high calibrate procedure
Cal Weight
Shows and allows the user to set the calibrate weight value
Cal Cap
Shows the raw captured calibrate counts
L.F.
Shows the calculated Loading Factor (Same value as in Calibrate Menu, Manual
Entry)
Cal Speed Menu
This menu is used to access the various speed calibration procedures. It contains the following items:
ITEM
FUNCTION
State
Shows the state of the speed configuration process
Low Reference
Selecting this item takes the user to the Low Reference(Cal Speed) menu
High Calibrate
Selecting this item takes the user to the High Calibrate(Cal Speed) menu
Manual Entry
Shows and allows the user to set the calculated Pulse Factor value (Same value as in
Cal Speed Menu)
Clear Ref/Cal
This item invokes method that clears the speed reference and pulse factor
Low Reference (Cal Speed) Menu
This menu is used to perform the low reference speed procedure. It contains the following items: