Ronan X96S WEIGH SCALE - Manual (Page 52)

48
Configuration
Ronan ships the Weight Scale System with factory-default software settings. Those settings are responsible for the information
that initially appears on the status displays.
After installation at your site, you may need to reconfigure the system to fit your application. The goal is to correlate the X96S
output with your actual weight readings. The list below summarizes the activities that are detailed in the remainder of this
chapter:
- Check the factory-default settings to be sure they are appropriate for your circumstances. IF NOT, make the necessary
changes and document those changes for future reference.
- Perform an initial calibration to correlate the X96S’s output to the actual process rate/weight
- Document detector output counts at calibrated values to assist in troubleshooting. Also, record changes you make to factory-
default settings. Keep this information for future reference.