Ronan X96S WEIGH SCALE - Manual (Page 17)

13
Displays Menu
The menu titled “Displays” contains the following item:
ITEM FUNCTION
Status Display Selecting this choice takes the user to the Status Display menu
Status Display Menu
The Status Display menu is used to configure the device status display. It contains the following items
ITEM FUNCTION
Analog Bar Shows the current state of the analog bar display (enabled or disabled) and allows the
user change the state.
Line 1: Shows the data to be displayed on line 1 of the status display and allows the user to
change the selection
Line 2: Shows the data to be displayed on line 2 of the status display and allows the user to
change the selection
Line 3: Shows the data to be displayed on line 3 of the status display and allows the user to
change the selection
Line 4: Shows the data to be displayed on line 4 of the status display and allows the user to
change the selection
Line 5: Shows the data to be displayed on line 5 of the status display and allows the user to
change the selection
Line 6: Shows the data to be displayed on line 6 of the status display and allows the user to
change the selection
Line 7: Shows the data to be displayed on line 7 of the status display and allows the user to
change the selection
Line 8: Shows the data to be displayed on line 8 of the status display and allows the user to
change the selection
Each line may each select one of the following:
SELECTION MEANING
Rate Rate (example: pounds per hour)
Weight Weight (example: pounds per linear foot)
Speed Speed (example: feet per second)
Totalizer Totalizer (shows the accumulated weight)
PD Counter PD Counter (shows the current value in the predetermined counter)
% of Weight Shows the percent of Weight based upon the min and max Weight range
% of Rate Shows the percent of Rate based upon the min and max Rate range
% of Speed Shows the percent of Speed based upon the min and max Speed range
Head Temp Head Temperature (if Available)
4-20 mA 4-20 mA output level
Filt Cnts Filter counts (from scintillation detector) or raw analog measurement (from ionization detector)
Date & Time Current date and time
Tot Elspd Time Shows the Total Elsped Time since the last time Totalizer was reset
Not Assigned Blank line