Ransburg Vector R Series Classic 79520 R90 Waterborne - Manual (Page 59)

55
Vector R Series Classic Applicators - Parts Identification
Ransburg
AH-06-02.12
80130-51X 9060 POWER
SUPPLY ELECTRICAL
SPECIFICATIONS
Input Voltage: 100-240 VAC
Current: 1 A max. RMS
Frequency: 50/60 Hz
Wattage: 40 watts (max.)
Output Voltage: 20-65 kV DC (79344-11X)
20-90 kV DC (79344-12X)
Current: 140 microamps (max.)
Electrical
Height: 16.5cm (6.5-inches)
Width: 37.8cm (14.9-inches)
Depth: 30.7cm (12.1-inches)
Weight: 10.2 kg (22.5 lbs.)
Physical
Supply Air: 6.9 bar (100 psig) maximum
Pneumatic
Fluid Flow Capacity: 1000 cc/minute**
Operating Pressure (Air Spray)
Fluid: (0-6.9 bar) 0-100 psi
Air: (0-6.9 bar) 0-100 psi
Air Inlet: 1/4-18 NPSM(M)
Fluid Inlet: 3/8-18 NPSM(M)
Ambient Temp.: 40°C to 12.8°C
Consumption: 510 slpm (18.0 SCFM) @
3.4 bar (50 psig) inlet
Sound Level: 92dB (A) @ 50 psig inlet,
1m from applicator
** This reflects the maximum fluid volume the ap-
plicator can deliver. The maximum spray volume
that can be effectively atomized depends on fluid
rheology, spray technology, and finish quality re-
quired.
Operating Voltage: 90 kV DC (-) maximum
Current Output: 140 microamperes maximum
Part Sprayability: Determine sprayability of
part to be coated using
76652, Test Equipment
(See current "Paint, HV & SCI Test Equipment"
service manual.)
79520 R90 CLASSIC
WATERBORNE
SPECIFICATIONS
Gun Length: 27cm (10.7 inches)
Weight: 620 grams (21.9 oz.)
Cable Lengths (Std): 10m, 15m, 20m, 25m, and
30m
Atomizer Nozzle
Assembly (Std): 79374-65, 79377-45
Environmental/Physical
Electrical
Mechanical
220/240 VAC
110/120 VAC
220/240 VAC
80130-511
80130-512
80130-513
-65 kV DC
-90 kV DC
-90 kV DC
Voltage
Designation
Maximum
Output
9060
Part #
Control Unit Inputs / Outputs
79520-XXXXX 80130-51X
For Use With
9060
Part #
Control Unit / Applicator
Combinations