Ransburg Vector R Series Classic 79520 R90 Waterborne - Manual (Page 30)

26
Vector R Series Classic Applicators - Operation
Ransburg
AH-06-02.12
OPERATION
Description Applicator Type
3
4
START-UP DISPLAY
90 kV Classic
65 kV Classic
† DO NOT use a 65 kV Classic applicator
with the 90 kV power supply.
W A R N I N G !
Figure 6: Power Supply Start-Up Display
START-UP
After all installation procedures are completed,
operation of the applicator may begin. When the
ON-OFF switch is turned on, the kV display will
show the applicator type the 9060 Power Supply
is configured for and the microamp display will
show the current software revision level. These
items are displayed for about 2-3 seconds.