Ransburg Vector R Series Classic 79520 R90 Waterborne - Manual (Page 14)

Vector R Series Classic Applicators - Atex/FM
10
Ransburg
AH-06-02.12
APPROVED SPARE FLUID NOZZLES LIST
79377-46 (1.06mm ID, STD. WEAR), 79377-47 (.71mm ID, STD. WEAR),
79377-48 (1.19mm ID, STD. WEAR), 79377-144 (1.40mm ID, HIGH WEAR),
79377-145 (1.78mm ID, HIGH WEAR), 79377-146 (1.06mm ID, HIGH WEAR),
79377-147 (.71mm ID, HIGH WEAR), 79552-244 (1.40mm ID, STD. WEAR),
79552-344 (1.40mm ID, HIGH WEAR), 79552-345 (1.78mm ID, HIGH WEAR)
CONFIGURATION DWG. 79949 REV B
OPTION "C" DESIGNATIONS
FLUID DELIVERY COMBINATION
1 OFFSET WITH .093" ID FLUID TUBE-PART NUMBER: 79438-00 & 9704-16
2 45° WITH .093" ID FLUID TUBE-PART NUMBER: 79439-00 & 9704-16
3 OFFSET STAINLESS WITH .093" ID FLUID TUBE-PART NUMBER: 79438-01 & 9704-16
4 OFFSET WITH .250" ID FLUID TUBE-PART NUMBER: 79438-00 & 9704-11
5 45° WITH .250" ID FLUID TUBE-PART NUMBER: 79439-00 & 9704-11
6 OFFSET STAINLESS WITH .250" ID FLUID TUBE-PART NUMBER: 79438-01 & 9704-11
7 OFFSET WITH .125" ID COILED FLUID TUBE-PART NUMBER: 79438-00 & 79871-00
OPTION "B" DESIGNATIONS
TRIGGER TYPE
2 FOR TWO FINGER TRIGGER-PART NUMBER: 79325-02
4 FOR FOUR FINGER TRIGGER-PART NUMBER:79325-04
OPTION "D" DESIGNATIONS
SPRAY TECHNOLOGY
0 FOR STANDARD SPRAY, 65V CAP, #44 NOZZLE -PART NUMBER: 79374-65 & 79377-44
1 FOR STANDARD SPRAY, 65V CAP, #45 NOZZLE -PART NUMBER: 79374-65 & 79377-45
2 FOR TRANSTECH SPRAY, 122V CAP, #245 NOZZLE -PART NUMBER: 79374-122 & 79552-245
3 FOR ROUND SPRAY-PART NUMBER: 79962-00 & 79959-00
OPTION "A" DESIGNATIONS
CABLE LENGTH
0 FOR NO CABLE
1 FOR 10 METER CABLE-PART NUMBER: 79518-10
2 FOR 15 METER CABLE-PART NUMBER: 79518-15
3 FOR 20 METER CABLE-PART NUMBER: 79518-20
4 FOR 25 METER CABLE-PART NUMBER: 79518-25
5 FOR 30 METER CABLE-PART NUMBER: 79518-30
OPTION "E" DESIGNATIONS
CONTROL UNIT
0 FOR NO CONTROL UNIT
1 FOR DOMESTIC SALES, 110/120 V -PART NUMBER: 80130-211
2 FOR EUROPE, 240V-50/60 Hz -PART NUMBER: 80130-212
3 FOR CHINA, 240V-50/60 Hz -PART NUMBER: 80130-213