79503 r90 classic solventbrone specifications, 79504 r70 classic solventborne specifications, Ransburg – Ransburg Vector R Series Classic 79520 R90 Waterborne User Manual
Page 18: Vector r series classic applicators - introduction, Environmental/physical electrical mechanical
Vector R Series Classic Applicators - Introduction
14
Ransburg
AH-06-02.12
Fluid Flow Capacity: 1000 cc/minute**
Operating Pressure (Air Spray)
Fluid:
(0-6.9 bar) 0-100 psi
Air:
(0-6.9 bar) 0-100 psi
Air Inlet:
1/4-18 NPSM(M)
Fluid Inlet:
3/8-18 NPSM(M)
Ambient Temp.:
40°C to 12.8°C
Consumption:
510 slpm (18.0 SCFM) @
3.4 bar (50 psig) inlet
Sound Level:
92dB (A) @ 50 psig inlet,
1m from applicator
** This reflects the maximum fluid volume the appli-
cator can deliver. The maximum spray volume that
can be effectively atomized depends on fluid rhe-
ology, spray technology, and finish quality required.
Operating Voltage: 90 kV DC (-) maximum
Current Output: 140 microamperes maximum
Paint Resistance:*
.1 MW to ∞
*(Use Model No. 76652, Test Equipment)
Part Sprayability:
Determine sprayability of
part to be coated using
76652, Test Equipment
(See current "Paint, HV & SCI Test Equipment"
service manual.)
79503 R90 CLASSIC
SOLVENTBRONE
SPECIFICATIONS
Gun Length:
27cm (10.7 inches)
Weight:
620 grams (21.9 oz.)
Cable Lengths (Std): 10m, 15m, 20m, 25m, and
30m
Atomizer Nozzle
Assembly (Std):
79374-65, 79377-45
Environmental/Physical
Electrical
Mechanical
Fluid Flow Capacity: 1000 cc/minute**
Operating Pressure (Air Spray)
Fluid:
(0-6.9 bar) 0-100 psi
Air:
(0-6.9 bar) 0-100 psi
Air Inlet:
1/4-18 NPSM(M)
Fluid Inlet:
3/8-18 NPSM(M)
Ambient Temp.:
40°C to 12.8°C
Consumption:
510 slpm (185 SCFM) @
3.4 bar (50 psig) inlet
Sound Level:
92dB (A) @ 50 psig inlet,
1m from applicator
** This reflects the maximum fluid volume the appli-
cator can deliver. The maximum spray volume that
can be effectively atomized depends on fluid rheol-
ogy, spray technology, and finish quality required.
Operating Voltage: 65 kV DC (-) maximum
Current Output:
140 microamperes maximum
Paint Resistance:* .1 MW to ∞
*(Use Model No. 76652, Test Equipment)
Part Sprayability:
Determine sprayability of
part to be coated using
76652, Test Equipment
(See current "Paint, HV & SCI Test Equipment"
service manual.)
79504 R70 CLASSIC
SOLVENTBORNE
SPECIFICATIONS
Gun Length:
24cm (9.6 inches)
Weight:
555 grams (19.6 oz.)
Cable Lengths (Std): 10m, 15m, 20m, 25m, and
30m
Atomizer Nozzle
Assembly (Std):
79374-65, 79377-45
Environmental/Physical
Electrical
Mechanical