General Pump MW Repair Manual - Manual (Page 8)

GENERAL PUMP
A member of the Interpump Group
MW/S SERIES
Remove the ring gear support ring (1, fig. 16).
Unscrew the connecting rod screws (1, fig. 17).
Remove the connecting rod caps with the lower semi-bearings, taking special care of the disassembly
sequence during disassembly.
The con-rod caps and their relative half supports must be reassembled in exactly the same
order and coupling with which they were disassembled.
To avoid possible errors, caps and half-supports have been numbered on one side (1, fig. 18).
Page 8 Ref 300791 Rev.C
11-12